Aspect Gondola Panel Union Connector
- $9.50
The Aspect Panel Union Connector – Matte Black is designed for shop owners who want a clean, seamless connection between Aspect gondola Panels. It slides inside the frame and bolts from the outside using black screws, keeping the hardware nearly invisible once installed.
Each connector includes four 5/16" diameter x 3/4" long bolts. Two are required per install — one for the top and one for the bottom. This piece eliminates panel sag while preserving the display's polished appearance.
Important: This connector doesn’t allow the joined panels to stand alone. To create a freestanding setup, you must add T-Legs or a 90° Gondola Panel at both ends.
Technical Specifications:
-
Finish: Matte Black mounting screws; raw steel internal bracket
-
Application: Side-by-side panel connection
-
Installation: Slides inside panel frame, bolts through exterior
-
Hardware: 4 bolts per connector (5/16" dia. x 3/4" long)
-
Usage: Two per connection (top and bottom)
-
Freestanding note: Must use T-Legs or 90° panels on ends
-
Sold individually
-
Joins two Gondola Panels side by side with no visible connection
-
Raw steel connector installs inside the frame with matte black bolts
-
Requires two per connection and end support for freestanding use
Specifications
| Pieces Per Full Carton | 40 |
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
| GTIN Number | 00841134136926 |
| Finish | Matte Black |
| Finish | Matte Black |
Specifications
| GTIN Number | 00841134136926 |
| Finish | Matte Black |
| Finish | Matte Black |
| Pieces Per Full Carton | 40 |
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
- $9.50
The Aspect Gondola Panel Union Connector – Gloss White is made for store owners who want to connect two Aspect Gondola Panels without sacrificing simplicity or style. The raw steel connector slides inside the frame and bolts from the outside with zinc-coated screws, keeping the connection secure but out of sight.
Each connector includes four 5/16" diameter x 3/4" long bolts and requires two units per connection — one at the top and one at the bottom to maintain panel alignment and prevent sagging.
Important: This union connector alone does not support a freestanding display. You must use T-Legs or add 90° Gondola Panels at each end for proper structural stability.
Technical Specifications:
-
Connector material: Clear-coated raw steel (internal)
-
Mounting hardware: Zinc-finished bolts
-
Use: Connects two panels side by side
-
Installation: Hidden inside frame; bolts through outer steel
-
Required per setup: 2 connectors (top and bottom)
-
Freestanding support: Use T-Legs or 90° Gondola Panels
-
Sold individually
-
Cleanly connects two Gondola Panels side by side
-
Zinc-finished bolts compliment Gloss White displays
-
Use two connectors per connection and end support for freestanding stability
Specifications
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
| GTIN Number | 00841134136933 |
| Finish | Gloss White |
| Pieces Per Full Carton | 40 |
Specifications
| GTIN Number | 00841134136933 |
| Finish | Gloss White |
| Pieces Per Full Carton | 40 |
| Multiple Cartons | 1 |
| Carton Shipping Weight (Lbs.) | 40.01 |
| Carton Dimensions | 10"L x 9"W x 5"H |
-
Connects two Gondola Panels side by side with a clean, flush finish
-
Installs inside the frame — no visible hardware from the outside
-
Must be paired with T-Legs or 90° panels for stable freestanding use
The Aspect Panel Union Connector offers a simple way to create longer, seamless display runs by joining two Aspect Gondola Panels side by side. The steel connector slides inside each panel’s frame and bolts through the outer tubing — leaving the connection hidden while still offering full structural support.
Each unit includes four bolts (5/16" diameter x 3/4" long) and matching finish screws: matte black for black panels, and zinc steel for gloss white. To ensure a level and sag-free display, use two connectors per setup — one at the top and one at the bottom.
While this piece aligns and connects panels securely, the unit itself does not make your display freestanding. For floor stability, use T-Legs or attach additional Gondola Panels at a 90° angle at both ends.
Technical Specifications:
-
Use: Connects two Gondola Panels side by side
-
Installation: Slides inside frame; bolts through steel tubing
-
Connector finish: Raw steel with clear coat (concealed)
-
Hardware: 4 bolts per connector (5/16" dia. x 3/4" long)
-
Required per install: 2 connectors (top and bottom)
-
Panel support: Must use with T-Legs or 90° side panels
-
Finish detail: Screws match selected panel finish
-
Sold as: Individual connector